Author |
Message |
Sleez
| Posted on Monday, March 07, 2005 - 06:42 pm: |
|
I am looking for one of the spacers/standoffs that go inside the pro series CF air cleaner for S1, S3, M2 carbed bikes. It is the hex shaped spacer with internal threads and a counter sunk area on one end. The hold down screw through the CF cover goes into this spacer/standoff. |
Jsunstar
| Posted on Monday, March 07, 2005 - 09:35 pm: |
|
i made a set with rod and a couple of nuts... works the same. i dont think you can buy them jh |
Kccyclone
| Posted on Monday, March 07, 2005 - 09:56 pm: |
|
I used the long nuts made to put all-thread together. Used a little lock tight and never had a prob. |
Loki
| Posted on Tuesday, March 08, 2005 - 12:40 am: |
|
Sleez, ping me. I have a set of the deep stand-offs from my trashed rhc |
Sleez
| Posted on Tuesday, March 08, 2005 - 12:00 pm: |
|
thanks everyone, i was planning on making some (having some made at work) if i couldn't find one here. Loki, you have mail (Message edited by sleez on March 08, 2005) |
Loki
| Posted on Tuesday, March 08, 2005 - 02:42 pm: |
|
Sleez, you have mail back Just pop me an addy, yours for the asking. time to own up to some favors that were passed my way from fellow badweb types. |
Sleez
| Posted on Tuesday, March 08, 2005 - 02:55 pm: |
|
Loki, thank you! |
|