| Author | Message | ||
     Forerunner |
A few parts from my Blast and some non-specific parts that gotta go. More to come when I get time to take more pictures of the other parts. All prices include shipping to the lower 48. Blast parts removed at 650 miles. Blast footpeg brackets with 1125Cr footpegs modified and installed and original rider/passenger footpegs included. Also includes inner frame mounting plates, lock nuts, and master cylinder and reservoir bolts, usual paint scuffs but overall good shape. Pricier since they’re heavy to ship and the dang Cr footpegs cost me $30 lol. $75     Brand new Driven and ProGrips, $16ea  Stock black X1 levers, removed at 5k miles, slight scuff on bottom of clutch lever that’s been touched up. I tried to capture it in the picture, $25    Cheap eBay made in China LED tail light with integrated signals and clear lens. Installed for a couple of hundred miles. Works and looks great but the LED density is sparse. Also has down firing white LEDs to illuminate the license plate(which the Clear Alternatives brand don’t, go figure). Like new condition $20   Cheap lane splitter mirrors that came on my X1, $10   Clear Alternatives brand ceramic load resistors used for slowing down the fast flashing when LED turn signals are installed, includes grommets and wiring taps. Brand new $8/pair Also have 1 pair of ceramic load resistors where a lead wire broke off (right most pair in pic below), can be easily soldered/repaired $5  3 Clear Alternatives brand smoked tail light lenses for X1, S1, M2, Blast, and some older Ducati Monsters. Includes red bulb and STICKERS! Yes STICKERS! Brand new $25ea  Blast OEM flasher relay removed at 650 miles. $8  Blast stock silver lever set, slight scuff on end of one lever. $25   Brand new never installed Buell tachometer. If you want to install a Buell v-twin tach on your Blast like I did you'll need a signal multiplier to double the tach signal for this to read correctly. $50   More items to come… Thanks, Nels | ||
| Forerunner |
1 smoked Clear Alternatives tail light cover pending, 2 left Bar end mirrors pending Thanks, Nels | ||
| Forerunner |
1 Smoked Clear Alternatives tail light cover - SOLD Bar end mirrors - SOLD 2 Smoked Clear Alternatives tail light covers - PENDING Thanks, Nels | ||
| Forerunner |
All Smoked Clear Alternatives tail light covers - SOLD Thanks, Nels | ||
| Forerunner |
Cheap ass Chinese LED tail lights - PENDING I've had a few inquiries on installing a V-twin tach on the Blast. I'm not aware of any specific write-ups but can provide some info on what I did. While not difficult to do(I did it afterall so how hard can it be?) you should definitely not be afraid of basic wiring and soldering if you're paranoid like me. I installed the tach on my Blast in an M2 dash and took the signal from a Blast Screaming Eagle ignition(pink wire I believe). This needs to be run through a signal doubler so the tach will read correctly, I bought one from bakerelectronix.com for ~$30 but also had to add an inline 47uF 62V capacitor. Finally, to steady the needle I ended up wrapping a ground wire around the signal wire. Crappy phone pic of installation I just took:  Crappy phone pic with bike running showing the idle on the tach:  Regards, Nels | ||
| Forerunner |
More parts, shipping to lower 48 included: Dan’s(Thumpe) awesomely over engineered breather catchcan for the Blast. Had this installed for less than a 100 miles, looks and works great but decided to go a different direction. Run your breather hose to this and stick a K&N breather filter(not included) on top and you’re set. $40   Blast stock front and rear brakelines including rear pressure switch. Installed stainless lines and find the brake feel just too darn firm? Prefer the squishy feel and classic thick black looks of the stock lines? You’re in luck! $20 for both.   Stock blast mirrors in excellent shape. $25   Still have your kickstand safety switch? Don’t feel comfortable disabling this ‘safety’ feature?  Here are some spares: X1 kickstand safety switch(should be same as Blast), includes wiring harness plug and mounting lock nuts, excellent shape. $20  Blast kickstand safety switch with mounting lock nuts, like new. $20  Thanks for looking, Nels | ||
| Forerunner |
Cheap ass Chinese LED tail lights - SOLD Someone asked about the ProGrip and Driven grips size. They will fit 7/8" bars. Asking $16ea for the grips. First $26 takes both. Thanks, Nels | ||
| Forerunner |
Driven grips - SOLD Thanks! Nels | ||
| Forerunner |
Blast footpeg brackets w/Cr pegs - PENDING Stock Blast mirrors - PENDING Nels | ||
| Forerunner |
New Buell tachometer - PENDING Thanks! Nels | ||
| Forerunner |
New Buell tachometer available again. More Blast parts, shipping to lower 48 included. Larger items will take me a little longer to pack/ship. Stock Blast airbox like new(650 miles) complete with filter, paper gasket(I would probably replace), mounting bracket, and some bolts. . $40     Stock Blast rear hugger/upper belt guard also like new with 3 stock bolts and well nuts. $40    Blast lower belt guard in cherry condition, includes both stock bolts and well nuts. $15   Blast side panel also cherry. $25   Blast tail/rear fender/license plate holder with reflectors, cherry. $40     Still a few more items to come. Thanks for looking! Nels | ||
| Blueblast |
PM Sent re. airbox and tail light bracket | ||
| Forerunner |
All PMs replied to. Blast footpeg brackets w/Cr pegs - AVAILABLE Stock Blast mirrors - AVAILABLE Stock Blast airbox - PENDING Blast tail/rear fender/license plate holder with reflectors - PENDING Thanks, Nels | ||
| Forerunner |
All right, last of the parts(that I can think of for now). Blast sealed beam headlight removed from my 2005 Blast, like new. $15    Blast front sprocket cover, cherry. $20   That’s it for now, thanks for looking! Nels | ||
| Forerunner |
Stock Blast airbox - SOLD Blast tail/rear fender/license plate holder with reflectors - SOLD Nels | ||
| Forerunner |
Bump. | ||
| Forerunner |
New Buell tachometer - SOLD Dan’s awesomely over engineered catchcan - SOLD Nels | ||
| Forerunner |
Blast rear hugger - SOLD Thanks! Nels | ||
| Forerunner |
Updated list, pictures for each posted earlier in this thread. All prices include shipping to the lower 48. Brand new ProGrips, fits 7/8” bars - $16 Clear Alternatives brand ceramic load resistors used for slowing down the fast flashing when LED turn signals are installed, includes grommets and wiring taps. Brand new - $8/pair Also have 1 pair of ceramic load resistors where a lead wire broke, can be easily soldered/repaired - $5 Blast footpeg brackets with 1125Cr footpegs modified and installed and original rider/passenger footpegs included. Also includes inner frame mounting plates, lock nuts, and master cylinder and reservoir bolts, usual paint scuffs but overall good shape. - $75 Blast stock silver lever set, slight scuff on end of one lever - $25 Blast stock front and rear brakelines including rear pressure switch - $20 for both. Blast stock mirrors in excellent shape - $25 Blast kickstand safety switch with mounting lock nuts, like new - $20 Blast lower belt guard in cherry condition, includes both stock bolts and well nuts - $15 Blast side panel, cherry - $25 Blast sealed beam halogen headlight removed from my 2005 Blast, like new - $15 Blast front sprocket cover, cherry - $20 Blast OEM flasher - $8 Regards, Nels | ||
| Guernseyrob |
I'll take the mirrors. PM sent. | ||
| Forerunner |
PM replied! Nels | ||
| Forerunner |
Blast stock mirrors - SOLD! Thank you! Nels | ||
| Kenny_gilgore |
Runner, I am interested in buying the foot peg brackets, but I really don't want the pegs. What can you do on the price? KennyG | ||
| Forerunner |
KennyG, pm sent. Thanks! Nels | ||
| Guernseyrob |
Mirrors arrived, packed well, & look great. Thanks! | ||
| Restlessrustler |
You still have the foot peg brackets? Email me for a faster response. Ratfink78@aol.com. thanks | ||
| Forerunner |
Reply sent. Nels | ||
| Vicenzajay |
What is still available from this listing? I'm interested in the belt guards and airbox cover - all as backups. Might also be interested in the kickstand safety switch... Jay | ||
| Forerunner |
Ok, just verified I still have the following available. All prices include shipping to the lower 48. Brand new ProGrips, fits 7/8” bars - $16 Clear Alternatives brand ceramic load resistors used for slowing down the fast flashing when LED turn signals are installed, includes grommets and wiring taps. Brand new - $8/pair Also have 1 pair of ceramic load resistors where a lead wire broke, can be easily soldered/repaired - $5 Blast footpeg brackets with 1125Cr footpegs modified and installed and original rider/passenger footpegs included. Also includes inner frame mounting plates, lock nuts, and master cylinder and reservoir bolts, usual paint scuffs but overall good shape. - $75 Blast stock silver lever set, slight scuff on end of one lever - $25 Blast stock front and rear brakelines including rear pressure switch - $20 for both. Blast kickstand safety switch with mounting lock nuts, like new - $20 Blast lower belt guard in cherry condition, includes both stock bolts and well nuts - $15 Blast side panel, cherry - $25 Blast sealed beam halogen headlight removed from my 2005 Blast, like new - $15 Blast front sprocket cover, cherry - $20 Blast OEM flasher - $8 Thanks, Nels (Message edited by forerunner on March 25, 2014) | ||
| Forerunner |
Blast footpeg brackets - SOLD! Still have the following: Brand new ProGrips, fits 7/8” bars - $16 Clear Alternatives ceramic load resistors used for slowing down the fast flashing when LED turn signals are installed, includes grommets and wiring taps. Brand new - $8/pair Also have 1 pair of ceramic load resistors where a lead wire broke, can be easily soldered/repaired - $5 Blast stock silver lever set, slight scuff on end of one lever - $25 Blast stock front and rear brakelines including rear pressure switch - $20 for both. Blast kickstand safety switch with mounting lock nuts, like new - $20 Blast lower belt guard in cherry condition, includes both stock bolts and well nuts - $15 Blast side panel, cherry - $25 Blast sealed beam halogen headlight removed from my 2005 Blast, like new - $15 Blast front sprocket cover, cherry - $20 Blast OEM flasher - $8 All prices include shipping. Discounts for multiple items. Thanks! Nels |
