| Author | Message | ||
     Indybuell |
Where is the pile of used fairings? | ||
| Ezblast |
LOL - yes it is - went for more light! The pile is in my garage. EZ | ||
| Allen77360 |
i got free exhaust lol. i cant upload though. to big. https://lh6.googleusercontent.com/-aAGc0_AjYt0/T3Y GV4F0cII/AAAAAAAAAFA/31xg2G7VhCg/h301/newexhaust.j pg | ||
| Allen77360 |
lots of ground clearance now  | ||
| Ezblast |
And foot warmer - lol EZ | ||
| Wild_card |
howd you get your rear brake pedal to work with a pipe like that? i did the same thing and the pedal hits my pipe. | ||
| Allen77360 |
its close. The rear brakes are really tight so i can only push the pedal about an inch. im collecting parts right now to build some rearsets. | ||
| Allen77360 |
lol i got rid of k&n decal.  | ||
| Ezblast |
I'd cover that when inop to protect from dirt, change oil every thousand, and avoid dirty roads - lol - at least my filter filters, yours just keeps large rocks and flies out - lol EZ | ||
| Allen77360 |
Yes. Its temporary. | ||
| Allen77360 |
almost finished. i took lot pics while doing this. will upload later.  | ||
| Ezblast |
Nice - now take out all the interior walls and slap a filter over that, my buddy Scott did something simular long ago. EZ | ||
| Allen77360 |
Thats part of the old snorkel beside it. Im goin to leave the k&n inside for now. | ||
| Justotech |
Three days after I bought it. The carb was so gummed up that it wouldn't do more than idle, the back tire was nearly bald and it wouldn't go come out of first gear. I spent $500 getting it running and road legal again. Why did the idiot I bought it from put 2 stroke in it and then let it just sit for 2 years instead of getting it cleaned? My gas tank was gummed up and the running jet was completely clogged. http://sphotos.xx.fbcdn.net/hphotos-snc7/428715_31 29258943794_1034335639_32527475_196840203_n.jpg | ||
| Gater |
I just saw this on ebay someone turned a blast into a dual sport. It looks king or neet. http://cgi.ebay.com/ebaymotors/2004-BUELL-Blast-Mi ni-Ulysses-DUAL-SPORT-/160784213711?pt=US_motorcyc les&hash=item256f7c66cf | ||
| Ezblast |
You'll see that puppy a lot on ebay, at least till they sell it for parts - lol EZ | ||
| Jugallo94 |
Heres my new exhaust. I got tired of repairing my v&h can.  Heres what it looks like on the bike.  I used my v&h header pipe, and made a 1 into 2 y pipe out of 1 3/4in stainless pipe. I ran it back to the mount for the v&h can and then 45 degree'd the tips out. Its just straight pipes, but not much louder the the v&h was, but a much deeper tone now. I finished it off with 2000 degree flat black paint. Pics arent the best took them with the cell phone, I will get some better ones this weekend. | ||
| Ezblast |
Nice! | ||
| Gearheaderiko |
Where can I get me one of them Y-pipes!? Like it! The V & H headpipe and rear mount are perfect for custom work! | ||
| Gearheaderiko |
I like the dual sport! Having ridden a Blast on dirt, that looks perfect for it (if you like that sort of thing). | ||
| Ezblast |
Every Blast that does serious dirt roads for a while gets the same problem, busted mounts, supports, and bolts. Need a different frame and swing-arm for that - even the Dirt-track set ups would be to spindly for daily work, though you could pay 5000 and then have them re-inforce it for a couple grand more - lol -  Rooks comes close -  A true Modern Bobber - street!  Streetfighter/modern Cafe - Street!  This could work - lol  This is what everyone wants - EZ | ||
| Gunut75 |
This is what everyone wants - Yes..............it is!  | ||
| Gunut75 |
Where can I find that wonderful tail section????? | ||
| Ezblast |
That 710 would dust a XB9 And probably give the 12 a run for its money - speedwise - limited edition motorcycles - made in the USA - my bad, its British - if I remember right - at 295 lbs - CF wheels would be perfect for it - it just purely boogies - corners and straights - lol EZ (Message edited by ezblast on April 23, 2012) | ||
| Ezblast |
There is a simular tail section that comes up on Ebay now and again for a Blast - very simular look. Could try a search there, and Amazon. EZ | ||
| Jugallo94 |
Gearheaderiko if you were asking where to get the y pipe I used, its a custom made pipe. I just took some 1 3/4inch stainless pipe and made up a y pipe. Luckily where I work we do pipe bends and was able to get some scrap pieces to make this up. Other then having the v&h header I just had a guy cut and welded the rest to make it how I liked it, since I dont weld. Then got a pipe expander and expanded the front to fit over the header. Then cut some slits in it for retightening with a clamp. If you like it I can ask him about making some more. (Message edited by jugallo94 on April 28, 2012) | ||
| Allen77360 |
i made undertail exhaust. it doesnt scrape on speed bumps or going around corners any more. but pic is to big to upload. i cant edit it from my phone. http://www.buellblastmods.com/viewtopic.php?f=11&t =30 | ||
| Gearheaderiko |
Well, I already have an undertail exhaust  I do like the idea of running a 1 3/4" Pro Series style of exhaust. I dont have the time to make one, but I dont have the money right now to have one made  It would depend on how much he would charge for the adapter, since I have everything else. | ||
| Ezblast |
The perfect Blast - lol - http://www.bikeexif.com/buell-blast EZ | ||
| Allen77360 |
idk lol http://www.bikeexif.com/wp-content/uploads/2009/12 /mac_motorcycles.jpg |
