| Author | Message | ||
     Super_cj |
turn signals and horn stoped working on me today at the same time when i got home i replaced a fuse and the horn fixed how can i fixe the turn signals? | ||
| Ezblast |
Flasher may have shorted - replace flasher - lol EZ | ||
| Super_cj |
thanks what flasher would work for 00 blast on harley website it show 15 diffrent but it wont say what bike its for | ||
| Ezblast |
You have mail. EZ | ||
| Super_cj |
ok thanks i got it this sucks i just spent over 200 to get it running yesterday now i have to wait to get $50 to get the flasher! | ||
| Ezblast |
Practice hand signals? EZ | ||
| Gearheaderiko |
The turn signal flasher pt # Y0621.M lists for $9.75. So whoever wants $50 is ripping you off. Another commonly available flasher will probably work, but I dont which one. | ||
| Ezblast |
I have yet to find an auto one that works, I have a life time supply of them for my cars because of that - lol EZ | ||
| Gearheaderiko |
While I find it hard to believe there isnt a crossover, I dont doubt that you'd done the research  Needless to say a stock one is only $10 and its the same as an XB flasher, so it should be in stock. (After all this I hope thats his problem). | ||
| Super_cj |
my local harley dealer said it was $43 so im going to go to a diffrent shop | ||
| Super_cj |
okay i orderd the part yesterday but i ran out of gas yesterday and the turn signals stared to work but when i got it running the blinkers stoped working agin would this still be the flasher? | ||
| Ezblast |
Check your grounds, how old the battery, sounds like maybe a short/break in a wire also? Play with the wiring and see what happens - carefully! EZ | ||
| Super_cj |
i checked the ground all good i put the battery on a battery tender for a litle bit but still not working im going to try to see if i mixed up a wire on it agin | ||
| Ezblast |
There are 2 grounds - one in front and one by the battery. EZ | ||
| Reuel |
Check the wires that connect to the flasher. If you hold it so the connector slots are left, top, and right, and short the left and top while you have a turn signal on, the respective lights should come on. If they do, check the right wire to see if you have conduction to ground. If they don't, one should have 12 volts, and the other won't. If you have 12 volts, then it's between your flasher relay and your signal switch. |
