G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Tbs_stunta Posted on Sunday, February 24, 2008 - 11:40 am:        Hey, I have a Blast in my garage this winter and I've been trying to figure out how to remove the seat. I found a manual release under the tailsection that hold a pin in place, but I can get the seat to budge. Any ideas on what I'm missing? Cheers   Buuueller Posted on Sunday, February 24, 2008 - 12:07 pm:        There is a tab that slides into a slot to hold the front of the seat down. Just hold the release lever open, lift up slightly on the rear of the seat so the pin is clear of the release lever, and slide the seat towards the rear of the bike and it should come off. (Message edited by buuueller on February 24, 2008)   Reuel Posted on Sunday, February 24, 2008 - 12:17 pm:        Mine sticks sometimes, too. Then, I just pull really hard while pushing the manual release, and it pops off.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: