| Author | Message | ||
     Big_deezul |
Kevin is the freaking man! We blew up the motor on our endurance bike at CMP this weekend. Kevin and Wayne pulled us out of a jamb as we rustled though some parts boxes and put together a running motor. We had to swap out the wiring harness and run the stock swing arm and even belt drive in the race because our original motor was the 08+ but the the other was the old style...they got us running and we were able to finish the race thanks again to the Drummer folks! | ||
| Smoke |
congrats on your finish!! tim #222 | ||
| Kds1 |
Thanks Dennie!!! it was alot of fun for us!! wish we could make all the races, maybe someday.... Kevin www.kdfab.com | ||
| Xoptimizedrsx |
Dennie How did the bike run on the track after the remote dyno work. Remember we can do better on the dyno once they fix the wideband guage. Just a hunch are you running leaded race fuel? Here is what we did. we already got it up from 90 Hp to 98 hp . I'd say I can get it up a few more for you soon. Kevin We are working off the base drummer map (I made for you)93Hp. It was 3 hp more than another ecm (drummer) (90Hp) that was purchased before I did anything extra to the one that was loaded with the map I made a long while ago for you... I really didn't mess with fue, however I did mess with timing, fuel durations areas, rpm, and tables. The Tq line moved much better. Dennie can post the dyno graphs if he chooses, I didn't transfer those to my PC. Total cost to them ZERO bucks" just a little time on the dyno and a remote session on the pc.... | ||
| Big_deezul |
no...just the GT260 fuel bike ran awesome! the top end power was something I never thought I would see from the XB. It really was strong on the straights. Thanks again for all your help Mike. I have a different dyno we can run on to fine tune the rest. | ||
| Paint_shaker |
Kevin is good people! |
