| Author | Message | ||
     Lucas70374 |
building my 90 inch motor and would like to add a bigger oil cooler. whats a good one out there to use | ||
| Slaughter |
You can get a good 4-row cooler from any auto performance shop since you're going to have to be fabricating your oil lines anyways. | ||
| Slaughter |
Come to think of it, the oil cooler from Buell Racing shouldn't require a race license since it doesn't affect emissions... have your dealer give them a holler! | ||
| What_the |
If you can make up some oil lines, Q0002.1AH prothunder oil cooler is available from race support. It accepts AN style fittings and is intended for the seibimoto, buell thunderbike style bodywork. Something like this faring you see on quite a few thunderbikes. http://www.yoyodyneti.com/ProductInfo.aspx?product id=SL001002G | ||
| Walt221 |
The oil cooler What_the is talking about is made by Fluidyne and works great. Here's a picture of one on my old race bike. http://www.badweatherbikers.com/buell/messages/21/ 456221.html?1243449893 | ||
| Lucas70374 |
thanks guys thats exactly what im looking for. Do you guys know the fitting size to the cooler and the pump or maybe where I can find out | ||
| What_the |
-6 at the cooler. Engine adaptors/fittings depend on the year, but you can go from whatever to -6 AN with a bit of digging. |
