| Author | Message | ||
     Zxmarc |
doing a few races next year and need help with safety wiring. if someone could post pics of the safety wire needed for the xb, can't figure out rear caliper holder bolts, front axle, rear axle... please help thanks | ||
| Skully |
Hey Marc, Here is what the Central Motorcycle Racing Association requires to pass tech: http://www.badweatherbikers.com/cgibin/discus/show .cgi?tpc=6817&post=531187#POST531187 Let me know if you have additional questions. Keith | ||
| Knickers |
Keith, What is the safety pin looking doohicky on your dipstick and where can I get one? Is that legal for most race orgs? | ||
| Skully |
Hello Kurt, The safety pin doohicky is available at most hardware stores (Lowes, Home Depot) in the nuts and bolts area. Look for the specialty hardware in drawers and you'll find these in various sizes. Works great! It's legal in the Central Motorcycle Racing Association which closely follows CCS but I don't know where else it is legal. Keith | ||
| Zxmarc |
hey keith where do i get a belly pan like the one in your linked post. did you not drill the nuts on the oil lines thanks Marc | ||
| Slaughter |
Marc, Check the rules in your race organization. MOST of them will let you secure your oil lines with a bead of silicone rubber squeezed on each threaded fitting to prevent it from turning. Much easier. | ||
| Skully |
Hello Marc, The belly pan is a Buell race item, available through most H-D/Buell dealerships. They may look at you like you are crazy but tell them to call Henry Duga. I purchased mine from Appleton Buell/H-D, one of our BadWeB sponsors. And, you are correct. I didn't properly wire the oil line nuts. Keith | ||
| Zxmarc |
keith do you recall the price, i do have one in the garage for a zx9r 200 that i might be able to fit but if the stock one is not too expensive i wont waste time fitting it thanks Marc | ||
| Schmitty |
ZX, The belly pan is $150 from your local Buell Dealer. You may have to do some trimming, and you have to drill your own holes. If you can get a hold of Coolice here on Badweb, he has a very simple mounting system for the pan. Schmitty | ||
| Rocketsprink |
           | ||
| Zxmarc |
thanks alot for pics... nice job |
