G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Buellishxx Posted on Wednesday, June 21, 2006 - 10:23 am:        Is there a kit with all the bolts / drain plugs pre drilled for safety wiring? For the most part the only thing that looks difficult is how to wire the axles. I'm hoping that our track will accept wiring only the pinch bolts.   Soloyosh Posted on Wednesday, June 21, 2006 - 01:16 pm:        Not sure about a kit but the parts manual has the fastener specs in it so you could source your own. The specs are only for the non-specialized fasteners (ie. regular cap-screws, bolts, nuts etc.). Cheers Brett   Diablobrian Posted on Wednesday, June 21, 2006 - 02:09 pm:        There are jigs available for safety wiring bolts. They are worth while. Buy lots of 1/16 jobber drill bits for safety wiring. and be sure to center punch if you are drilling it without the jig. As far as pinch bolts,CCS/ASRA has had no problems with our front axle having just the pinch bolts wired and we've passed tech many times. Our rear is a Hal's chain conversion and it is safety wired normally. (Message edited by diablobrian on June 21, 2006)   Buellishxx Posted on Friday, June 23, 2006 - 10:03 am:        Thanks for the info.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: