G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Hangetsu Posted on Friday, January 25, 2019 - 12:35 am:        Simple question: Has anyone used any of this companies tuning components and can express some opinion about them? For example, the Baro Sensor unit and the "Tune a Buell" device. I bought the Buelltooth diagnostic unit, and I am impressed with its usefulness, but I am curious about these other two devises. If anyone's used these or either of Buelltooth's exhaust systems, I'm curious to hear any thoughts or impressions. Thanks!   Swanthog Posted on Friday, January 25, 2019 - 09:51 am:        I recently installed the Baro sensor since the bike is full time open loop (runs much much better). However, I have not yet traveled out of the valley to know whether the new sensor is doing its job -- soon I hope.   Hangetsu Posted on Sunday, January 27, 2019 - 10:19 pm:        Thanks. After I learn a little more about "open loop" vs. "closed loop" configurations, I pay pick that piece up. I had a brief email exchange with Dave at Buelltooth, and we discussed the challenges of tuning an XB after doing a big-bore kit and headwork. He also suggested that the "Tune a Buell" piece was a pretty useful component as well. I'm considering a Hammer Performance bug bore kit and stage two headwork, since I'm currently looking at having to replace my upper pushrod seals. I figure, since I've got to remove the entire top end anyway,this may be a good time to look into this. I have heard that getting a good tune after making such a drastic mod can be challenging, but that this device can greatly simplify the process. I'm interested in hearing any personal experiences form those who have done this.   Swanthog Posted on Monday, January 28, 2019 - 01:45 pm:        I don't see a big bore kit for the 1203 XB on Hammer Performance's site and I don't see dyno's for it in their dyno area. http://www.hammerperf.com/tcbigborekits.shtml Do you have a link?   Ratchdaddy Posted on Thursday, June 13, 2019 - 11:52 pm:        I just got a Buelltooth. I have had intermittent luck pairing it to my samsung galaxy tab E, and no luck at all pairing it to my samsung galaxy S5. I followed the instructions verbatim. Any suggestions?   Greg_m Posted on Monday, June 17, 2019 - 11:13 am:        Pairs with my S5 so it's not a compatibility issue.   Swanthog Posted on Monday, June 17, 2019 - 11:29 am:        I have their cable and Baro Sensor (bike is 100% open loop). I just returned from a trip that took me from sea level to 5000+ ft and back again and back again (no, I didn't repeat myself). Bike ran bad ass entire time. BuellTooth provided the tune for my bike which has a modified exhaust with spark arrestor to stay compliant for the off-road shredding I enjoy. Sorry about the Jan 28th post. That clearly went to the wrong thread XD (Message edited by swanthog on June 17, 2019)   Hangetsu Posted on Saturday, June 22, 2019 - 12:40 am:        Mine pairs with my Pixel XL without issue.   T9r Posted on Tuesday, December 01, 2020 - 03:12 pm:        Here is some more information on the 1250cc big bore kit from Hammer Performance: http://www.hammerperf.com/xlbigborekits.shtml#1250 kits   Tpehak Posted on Tuesday, December 01, 2020 - 09:58 pm:        So you just installed those cylinders and pistons and that's it?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: