G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Brunocgs Posted on Wednesday, September 21, 2016 - 10:14 pm:        Hello all. Very interesting info here. Fantastic source of buell info. I have a 07 uly that displayed ecm issues. So i bought a new ecu on ebay. When it arrived, I installed it but did not work. Bike start for a few seconds and die. Is it possible to require a ecm programming? Both ecm have the jumper in the middle. My bike has no acm, so i made an emulator to stop code 21 from ecm. It is not quite working, but i don't think this is making the bike to die. Any other ideas?   Marcus_asparagus Posted on Thursday, September 22, 2016 - 02:33 am:        Hi, If you fit a different ecm, you will have to do a TPS reset so the new ECM can understand where the throttle sensor is relative to itself. It only understands where its old TPS is, think of them as a matched pair. Regards Mark.   Arry Posted on Thursday, September 22, 2016 - 02:57 am:        I believe that if it's a new ECM, it needs to have a program (parameters) "flashed" into it. (this is my understanding) Also, the TPS reset. (Message edited by arry on September 22, 2016)   Hugie03flhr Posted on Monday, September 26, 2016 - 06:28 pm:        These guys might be able to help you http://idspd.com/xcart/products-buell/xb12   Teeps Posted on Tuesday, September 27, 2016 - 11:46 am:        Do you have ecm spy?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: