G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Advoutlander Posted on Tuesday, July 01, 2014 - 10:02 am:        I located a discontinued Touratech part 380 0005 at touratech austria. I read 2 postings on here from 2006 that when they fitted the guard it made the front oof the bike vibrate violently. Touratech said they may have not send the right mounting parts. Is there anyone that has the front guard successfully fitted with no problems.   Electraglider_1997 Posted on Tuesday, July 01, 2014 - 10:48 am:        http://www.badweatherbikers.com/buell/messages/142 838/344591.html   Advoutlander Posted on Tuesday, July 01, 2014 - 10:54 am:        Thanks for the link. I see the op cut the clutch side and just bolted down the throttle side.   Turf_moor Posted on Friday, July 04, 2014 - 05:50 am:        I have had one on since 2008 with no problems. A useful part.   Advoutlander Posted on Friday, July 04, 2014 - 08:38 am:        Turf, did you have both of the 2 top mounts bolted on?   Turf_moor Posted on Friday, July 04, 2014 - 02:54 pm:        I'll have a look tomorrow when I'm in my garage. I can't picture it in my mind.   Harleywern Posted on Saturday, July 05, 2014 - 08:39 am:        It is important to use the flexible mounting as shown. Do not bolt them directly to the engine. Let me know if you need the instructions and I'll send them to you.   Turf_moor Posted on Sunday, July 06, 2014 - 04:43 am:        Beat me to it. That's just like mine. Fastens like that. It's an excellent guard.   Advoutlander Posted on Sunday, July 06, 2014 - 08:19 am:        Is this actually included in the kit from TT or pieces you DIY?   Harleywern Posted on Sunday, July 06, 2014 - 02:19 pm:        It is part of the kit. At least the newer ones. You should find the instructions on the internet. If not let me know and I'll send them to you.   Cmgaviao Posted on Thursday, July 31, 2014 - 04:21 pm:        damn... must have been the last ... dont see anymore   Pnw_uly Posted on Sunday, August 03, 2014 - 11:41 pm:        Finally mounted this thing up on the Uly, been sitting on a shelf for far too long. Michael - can scan and e-mail the instructions that include the parts list if interested. Since we are in the dry season, left off the lower portion of the front fender and mounted up the STT fork guards, also on the shelf for too long . . .   Advoutlander Posted on Monday, August 04, 2014 - 07:00 am:        Im ok for now thanks. Im still in Afghanistan, I expect the instructions are included. What coating do tour guards have?   Pnw_uly Posted on Tuesday, August 05, 2014 - 12:52 am:        The Touratech parts, like most of the plastics on the Uly are sprayed with Line-X. Based on expected heat from the muffler, the "inside" of the muffler guard was left bare steel... No issue with heat affecting the Line-X.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: