Author |
Message |
Advoutlander
| Posted on Thursday, May 30, 2013 - 09:47 am: |
|
Will brake and clutch levers from any xb fit the ulysses or or are the ulysses levers specifc? |
Froggy
| Posted on Thursday, May 30, 2013 - 09:55 am: |
|
All XBs use the same clutch lever (available in a few different colors), but the brake lever depends on which brake setup you have. If you have the ZTL1 (6 piston) brake, it uses a specific lever, and then the ZTL2 (8 piston) bikes use a different but similar looking lever. All Ulysses models use the ZTL1 6 piston setup stock, so you can use the same levers as any other ZTL1 6 piston XB. The levers are available in a few different colors, but I believe all but the black and "silver" colors are discontinued. |
Advoutlander
| Posted on Thursday, May 30, 2013 - 12:13 pm: |
|
Thanks for clearing that. |
Teeps
| Posted on Thursday, May 30, 2013 - 12:42 pm: |
|
And, don't waste your $$$ on the chinese knockoffs', found on ebay, either... Don't ask me how I know. |
Zac4mac
| Posted on Thursday, May 30, 2013 - 09:40 pm: |
|
Teeps - they can't be any worse than the CRGs I have on my Uly(09). They came off an 04 Lightning. Effin things rattle like they're on a Harley. Oh wait... I'm just glad I didn't have to pay for them too. They were given to me because they rattled so bad. They do look good and work well. Z |
Teeps
| Posted on Friday, May 31, 2013 - 11:48 am: |
|
The knockoffs could be brought up to "par" by correctly sizing the pivot hole with a bronze bushing. Now they just have a hole in the aluminum, that is too big... |
Desertjeff
| Posted on Sunday, June 02, 2013 - 06:11 pm: |
|
I really like my cheep Chinese knockoffs they work great and don't rattle but they have only been on for a couple thousand miles. Could be I might rethink this someday. |
|