Author |
Message |
Buelldualsport
| Posted on Tuesday, July 03, 2012 - 08:54 am: |
|
Who makes (anyone) a rear rack that will work with the factory side racks? The Fehling does not. We thought that Palmer made a rack, however it is not on their site anymore. Regards |
Arry
| Posted on Tuesday, July 03, 2012 - 02:46 pm: |
|
If the Fehling will bolt to the grab handles, you may only need to fabricate supports (one each side) between the Fehling and the factory side racks (where the cross piece attaches). I'm not familiar with the Fehling, so this is just a guess. |
Buelldualsport
| Posted on Tuesday, July 03, 2012 - 03:14 pm: |
|
Arry: The Fehling lower arm come into contact with the upper arms of the OEM buell Racks. Possibly the Palmer Rack might be an alternative, however, they do not list it on their site at this time. Thanks Tom |
Thisflatearth
| Posted on Tuesday, July 03, 2012 - 03:26 pm: |
|
I have the fehling rear rack on mine, I got some longer bolts and used spacers to lower the stock mounts away. posted up here somewhere a couple years ago. going good for 4 years |
Buelldualsport
| Posted on Tuesday, July 03, 2012 - 09:59 pm: |
|
Thanks for th update Any chance of a link to the original post? |
Thisflatearth
| Posted on Wednesday, July 04, 2012 - 12:16 pm: |
|
http://www.badweatherbikers.com/buell/messages/142 838/535547.html?1265792083 took a little digging. still have the bike bags racks and spacers. i thought i had the fehling but i now realize i bought the sw-motech. very happy with it just forget which one i bought. http://www.twistedthrottle.com/trade/productview/3 745/ have the biggest givi top box and have loaded it with various parts to include dana 60 axle knuckles and ice and drinks. never an issue. can load more photos if necessary. once you have the two racks together its not the hard to see what you have to bend and space. |
|