G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Pontlee77 Posted on Sunday, April 10, 2011 - 03:12 pm:        here we go again, i recently change my friends bike bearings for needle hons as his were shot, witting was quite easy after following some guidance from previous posts, the brake pulsing nearly disappeared, but it's now not as bad as before but there is still pulsing, the bearings on the wheel are fine, the rotor is a wave one, and pads looked fine, what d you suggest apart of changing brake pads?   Hughlysses Posted on Sunday, April 10, 2011 - 03:19 pm:        Easy, well-documented solution: http://www.EBRacing.com/shop/product27.html ~$40 and an hour or so to install.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: