G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Jim_williams Posted on Friday, June 11, 2010 - 09:46 am:        Only low beam. High works as normal. Bulb is fine but replaced anyway. All other lights work fine. 09 XP if that matters.. Thoughts?   Froggy Posted on Friday, June 11, 2010 - 09:57 am:        Did you do the "both lights on at same time" thing? If yes, how did you do it? If no, ignore this post.   Jim_williams Posted on Friday, June 11, 2010 - 11:37 am:        No Froggy. I just noticed the light wasn't working so figured it was a blown bulb. Turns out bulb is fine. Help!   Ratbuell Posted on Friday, June 11, 2010 - 10:00 pm:        Start the 'wiggle test' on the wiring...also, grab your shop manual and check the wiring diagram for the switch housing, and make sure you have power going to the low beam side when the switch is on 'lo'. Anything else not working? Something in the back of my damaged ol' noggin is saying it's fused along with something else....

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: