G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Djz Posted on Wednesday, January 27, 2010 - 07:55 pm:        I have looked but not found do i have to take brake rotor and pulley off to put in new rear bearing .   Gamdh Posted on Wednesday, January 27, 2010 - 08:05 pm:        I did not have to take either off to replace mine.   Kurbennett Posted on Wednesday, January 27, 2010 - 08:10 pm:        I removed the rear caliper but you dont really have to.   Ironhead1977 Posted on Wednesday, January 27, 2010 - 08:53 pm:        This is what I use.You also have to get the 30mm adapter for the rear bearings as it does not come in the set. You do not have to remove the rotor or pulley. http://pitposse.com/whbereset.html   Djz Posted on Wednesday, January 27, 2010 - 11:31 pm:        Thank you All ...Ironhead i went and order the bearing remover it look like a simple way thanks much

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: