| Author | Message | ||
     Electraglider_1997 |
Can you do us ULY folks a solid. What are the specs on the XR1200 belt. Width and how many teeth would be good. I'm thinking you probably have an XR1200 on your showroom floor that you could look at. Appreciate that if you can do it, thanks. | ||
| Jammin_joules |
exactly 1 inch width by my crude rule too guarded to count all the teeth, but pitch is 2 teeth in 1-1/8 inch What is this for?  | ||
| Electraglider_1997 |
Jammin, I mentioned on another post a while back about the XR1200 having the same looking idler pulley that Buell uses. I believe Froggy answered back that it has a different sized pair of drive pulleys then the ULY, BUT that still doesn't mean that the belts are different. Swingarm length might make up the difference and they might possibly be using the same belt. I just wanted to get the facts and put this quandary to rest one way or the other. |
