G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Buellhusker Posted on Sunday, May 03, 2009 - 12:49 pm:        Does any one have a photo of the throttle rerouting you have done when you installed the ROX handle bar risers??   Mbest Posted on Sunday, May 03, 2009 - 09:36 pm:        Hi Jim, I just got a new digital camera so I may be able to get a pic for you. I am using the 2" risers on my '08 Uly. I made up a little cable guide that I talked about over on the ADVrider "beasts" forum. Try a search on my username "mbfj40". Try late 2007, early 2008. If that helps you out, let me know. I my still have one or two of the little guides that I made up. If I can track em down I can send you one if ya like. mike   Buellhusker Posted on Monday, May 04, 2009 - 01:03 am:        Mike I was able to find some info on other persons ROX install but I did not find any photos of your install & routing of the throttle cables. And a big yes on your offer for the guide. I have the ROX installed but the throttle cables are really tight when at full right lock, I could get into trouble with this current set up. I will be looking forward to your photos.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: