Author |
Message |
Pontlee77
| Posted on Tuesday, April 07, 2009 - 10:40 am: |
|
Hello Guys, and Gals, Here is my problem, when i start the bike all is fine, if i turn completely the handle bar to the right the neutral light goes off and the oil/problem light turns on, i put on my bike the 07 cable router, and laos had to change the front fairing, my bike is a 06 uly, can any one guide me, i'm not looking forward to taking the front end apart again. Thanks, Miguel |
Mnrider
| Posted on Tuesday, April 07, 2009 - 11:11 am: |
|
Sure sounds like you have broken wires under that cable router.You'll have to remove the flyscreen and the headlight assy. and the router and cut the tape off the harness to inspect those wires.My cable router had a sharp plastic edge poking my harness that I had to grind off. |
Pontlee77
| Posted on Tuesday, April 07, 2009 - 12:19 pm: |
|
I changed the 06 model for the 07 to prevent that and seems that the solution is worse than the problem, because before doing any thing i didn't have the problem. |
Mnrider
| Posted on Tuesday, April 07, 2009 - 12:41 pm: |
|
Possible the wires were already damaged from the turning back and forth.I repair wires in cars and trucks where the wires flex near the door hinge often. |
|