Author |
Message |
Joecool8855
| Posted on Tuesday, April 15, 2008 - 05:05 pm: |
|
Has anyone installed the Renthal low bars on their Uly? I take it they need to be drilled for the controls. Opinions... |
Treadmarks
| Posted on Tuesday, April 15, 2008 - 05:42 pm: |
|
I did the renthal atv bend. Had to drill them. Didn't like the angle, and they were not as high as the stockers. |
Ft_bstrd
| Posted on Tuesday, April 15, 2008 - 07:00 pm: |
|
I have the Pro Tapers and ChadHargis has the Renthal Lows. Neither of us drilled them. He filed his control placement pins down. I used a soldering iron to melt them down. We each left enough for the control to bite. Mine don't move. |
Desmo900
| Posted on Wednesday, April 23, 2008 - 12:20 am: |
|
Im using the Renthal Med. from American Sport Bike. Low's were a smidge too low. Quick hit with a Dremel drum sander on the pins and all is goodness. |
Desert_bueller
| Posted on Wednesday, April 23, 2008 - 10:44 am: |
|
I want to get the Pro Taper Carmichael SE. It's just too much of a mission to get the 1 1/8 AND the risers shipped out here. Any advice on this, please Ft_Bstrd?? |
|