| Author | Message | ||
     Fast_eddie_1956 |
I checked the HD site and ran my vin which stated I did not have any recalls. I believe its the BAS that should be relocated at the tail section which it has not. Today we came home from a ride and there's a bolt missing from the kick stand. How do I find out for sure that there aren't any recalls on a the '06 Uly? | ||
| Davo |
Fast eddie, If the bolt came out then you need to get the new side stand. The new sidestand does not have a pivot bolt. It has a pin with a retainer clip. | ||
| Hughlysses |
Fast eddie, AFAIK, there's no way to check on-line to see if the recalls have been performed on your bike. Any Buell dealer can run your VIN and tell you the status of any outstanding recalls . You can either go to your local dealer or call one of Badweb's sponsor dealers and get them to do it. | ||
| Fast_eddie_1956 |
Hughlysses, I forget where I went on the HD site but there was a place to enter your VIN to check on recalls. I'll go to the dealer today to get a bolt and schedule the recall work. Thanks for the info. | ||
| Fast_eddie_1956 |
Called the dealer and they stated both recalls were done. So check your side stand bolts, mine went AWOL. | ||
| Ftd |
If you are referring to the 2 bolts that hold the stand to the engine case mine both came loose. AFTER the side stand recall was performed. Dealers must be prone to NOT using thread lock. | ||
| Wesman |
what is the URL of the Harley site where you can check your VIN? | ||
| Fast_eddie_1956 |
Here's the link https://www.harley-davidson.com/EX/MNT/SCHK/en/ser vicecheckup.asp?bmLocale=en_US&ilaction=none&req_u ri=https%3A%2F%2Fwww.harley-davidson.com%2FEX%2FMN T%2FSCHK%2Fen%2Fservicecheckup.asp%3FbmLocale%3Den _US | ||
| Wesman |
Thanks Fast_eddie! Wes |
