Author |
Message |
Bertotti
| Posted on Tuesday, July 17, 2007 - 09:10 pm: |
|
Well I have stalled once and come close a couple times since my 1 k service. I think I am running way to lean from a standstill. What do I need to do to remedy this. Who would I talk to to get the ecm flashed so it is a little richer? Will that smooth up my slow speed riding? I have read about the xb9 primary how much of a change will it make? Will it cost me in performance. I won't be going over 100 mph and i'd like to keep my mpg or improve it. I see a lot in all these other thread but I am approaching info overload. Thanks John |
Ft_bstrd
| Posted on Wednesday, July 18, 2007 - 02:46 am: |
|
Many have had incorrect throttle and TPS resets. If there is a Bueller in your area with the software, have them redo it. If not, have the dealership redo it. Request that there be a certain time for you to come in and make sure that they start on it while it's hot. If it isn't up to operating temperatures, the throttle and TPS settings will be off when it IS up to operating temperatures. |
Bertotti
| Posted on Wednesday, July 18, 2007 - 11:11 pm: |
|
Thanks i will do that. Or maybe i will just buy the software. I am hesitant since i do not have a PC the software doesn't work with mac but the company that makes the software email me and said although they have not tried to load the software for a palm from a mac in theory it should work. I may try it. |
Aeholton
| Posted on Thursday, July 19, 2007 - 08:06 am: |
|
You can pick up cheap Palm OS units on eBay for less than $50. Then get the palm software/cable. |
|