Author |
Message |
Iugradmark
| Posted on Sunday, June 24, 2007 - 06:46 pm: |
|
Can anyone tell me what this plugs together. Mine was undone. Assume as a result of something that dealer did during 1,000 mile service. Thanks |
Cavi
| Posted on Sunday, June 24, 2007 - 06:56 pm: |
|
A picture would help, but my guess is you are looking at the Data port where they hook up the coputer fro diagnostics and other things |
Aeholton
| Posted on Sunday, June 24, 2007 - 09:07 pm: |
|
Your dealer probably had the the rubber plug out to do the TPS reset. |
Chris_in_tn
| Posted on Sunday, June 24, 2007 - 09:11 pm: |
|
There is the data port and the battery charge plug. Those are the only rubber plugs by the seat. |
Ft_bstrd
| Posted on Sunday, June 24, 2007 - 09:40 pm: |
|
|
Iugradmark
| Posted on Sunday, June 24, 2007 - 11:55 pm: |
|
Chris, The two plugs seem to fit together but were not connected when I pulled my seat off. Do they plug together to weather protect the data port or do they need to be plugged together for some other purpose. Is the female end the battery charger end? Where do you get something that fits that plug for charging? |
Chris_in_tn
| Posted on Monday, June 25, 2007 - 08:09 am: |
|
There are two plugs. One is a two prong with both a male and female end(go ahead FT B) It should have an attached rubber cap. It is your battery charging plug. Most motorcycle battery chargers will have this style plug with it. The other plug has I believe four female holes, also with an attached rubber cap. It is your data port. These two do not plug together, I could imagine your ECM would get fried if you were to force them together. |
Treadmarks
| Posted on Monday, June 25, 2007 - 08:25 am: |
|
Fatty, you are just plain sick! |
|