| Author | Message | ||
     Chris_in_tn |
Does anyone have a part# for the rear luggage rack. Just the rack, no bag. I am having no luck with trying to find a used one. Thanks. | ||
| Mike_dinger |
Good luck. You need to order the top case in order to get the frame/rack. I wanted to do the same, but research proved nil. If you do some searching here only a few weeks ago, you will find the thread. I believe you can get a luggage rack from Touratech, but it requires that you remove the grab rails and beaver tail to mount it. | ||
| Chris_in_tn |
Thanks. That is what I was afraid of. I seen the Tuortach set up but as you said I do not want to loose my beaver tail and grab rails. I am going to use the Caribou side cases but they do not offer a rear case. | ||
| Ulywife |
Chris - try www.eurotechmotorsports.com They have a HB Journey 42 lt. rack, part #610.060 - $65.10. Website doesn't list a picture, but Eurotech has always been very helpful when we've ordered parts/accessories for these bags. | ||
| Chris_in_tn |
Thanks for the info Ulywife. That is not quite what I was looking for. I am needing the mounting bracket for the bag. However, they may well be able to help me. I will give them a call to see. Thanks for the info. | ||
| Soloyosh |
If someone actually installed the bag kit themselves, they should have the I-sheet (H-D speak for instructions). On the back is usually an exploded view with part numbers. | ||
| Chris_in_tn |
I went to the dealer today. I had to go to the top to get this bag and mount. The ownerof the dealership had to call Buell for me to be able to order just the rear bag and mount, the regular parts guy was lost. It is a "restricted part#". The parts manager and owner said they have never seen any part like this. Harley or Buell. | ||
| Brwkcw |
So what did you end up having to pay for just the bag and mount if I may ask? | ||
| Chris_in_tn |
It listed for $379 but they are giving me a 20% discount since I am buying a new bike. | ||
| Xbimmer |
I believe the topcase and bracket are "restricted" for solo sale because the bracket requires the sidecase brackets to be installed also for a secure mounting for the topcase. The intructions for the topcase indicate that. I too wanted only the sidecases and the topcase bracket, w/o the topcase. Went ahead and ordered all three anyway. | ||
| Alchemy |
More part number help please! I am looking for the part number of the sealed plastic housing that holds the 2 reflectors and clear lenses for 2006 Uly headlamps. This does not include the bulbs or wiring which would be separate parts. It has 3 attachment points. I believe and one of them is the beam level adjustment point that connects to the front fender. | ||
| Oldnotbold |
I am looking for the part number of the sealed plastic housing that holds the 2 reflectors and clear lenses for 2006 Uly headlamps. This does not include the bulbs or wiring which would be separate parts. It has 3 attachment points. I believe and one of them is the beam level adjustment point that connects to the front fender. Nope, it includes bulbs, holders, boots and wire harness. The USA P/N is Y0421.1ADA. Dennis | ||
| Alchemy |
Oldnotbold, Thanks much. I am surprised at all that is included but it makes sense. I bet it is expense so this is going to have to be a warranty issue. Thanks again! |
