G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Adrian_8 Posted on Friday, March 16, 2007 - 11:04 am:        I want to change the hand guards.. which ones work well on the ULY and what type of mounts work on the handlebar? I know Acerbis has a swivel mount that might work easy and they sell extensions bars......I am familiar with regular hand guards as I have them on my dirt bike..I want to get the right ones the first time (no cutting and bending) with the correct handlebar mount to eliminate the cobble-up/frustration factor. Any ideas?   Treadmarks Posted on Friday, March 16, 2007 - 01:02 pm:        The Acerbis rally brush guards are a direct bolt on with all the right hardware for the Uly. They are available in gray or black too.   Adrian_8 Posted on Friday, March 16, 2007 - 05:50 pm:        Tread...do those guards have the aluminum bar thru/behind the plastic deflectors? Did you use the swivel connectors?   Too_tall_todd Posted on Thursday, March 22, 2007 - 04:08 pm:        acerbis? they look good. where do you get them and how much do they cost?   Treadmarks Posted on Friday, March 23, 2007 - 07:00 am:        Adrian, No aluminum, just hard plastic with aluminum mounts. I did not use the swivel mounts. Much better than the stockers, but not as robust as some of the more expensive sets out there.   Treadmarks Posted on Friday, March 23, 2007 - 07:06 am:        Motostrano has them for about 59 bucks. http://www.motostrano.com/handguards.html   Rubberdown Posted on Friday, March 23, 2007 - 07:23 am:        Tread, tell me more about your mirrors, please.   Treadmarks Posted on Friday, March 23, 2007 - 08:00 am:        Tread, tell me more about your mirrors, please. Rubberdown, They are crg knockoffs, in a matte type finish. Aluminum with wide angle glass. Got 'em on ebay for 80 buckaroonies. They fit right on with the acerbis using the hardware that came with the handguards by just using a longer bolt.   Paochow Posted on Friday, March 23, 2007 - 12:33 pm:        I'm running the Tusk handguards from RockyMountainatv.com, $65 w/spoilers/wings. I've found them to be stronger than the Acerbis guards, and you can replace the spoilers and/or wings, in the event of crash damage. I've had friends crash test them at 35+mph in rocks and aside from some rock rash, they held up great. I had a friend explode a Acerbis guard in a low speed crash, which required me to drive his bike home several miles with no clutch lever, not fun. As you can see by the other two bikes in the garage, I've run these on several bikes.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: